84
1
2
3
5
6
7
8
9
1
2
4
TWIN NEEDLE SEWING
NOTES:
When you sew patterns with the twin needle, press
the twin needle button and test the stitches first
before you begin to sew.
Use the zigzag foot A or satin stitch foot F for twin
needle sewing.
Turn off the machine before changing the needle.
Use #60 or finer threads for twin needle sewing.
Threading the machine for twin needle
Place two spools of thread on the spool stand.
Draw both threads from the spools and pass them
through the points from 1 to 9 .
Make sure that the two strands of thread do not get
tangled.
Slip one of the threads in the needle bar thread
guide on the left, and the other on the right.
1 Needle Bar Thread Guide
Thread the needles from the front to back with your
hand.
2 Thread the Needles.
NOTES:
Threading from 1 to 7 is the same as for single
needle.
The automatic needle threader cannot be used for
the twin needle.
Janome 6600 Instruction Manual
MC6600P Owners Manual/ User Guide
To Next Page
Loading...
