65
Changing needle drop position
Press the stitch width adjusting button.
The LCD screen shows the left needle position from the
guide in millimeters.
Press on “–“ to move the needle to the right.
Press on “+” to move the needle to the left.
1 Left Needle Drop Position
2 Right Needle Drop Position
3 Guide on Foot
4 Distance between the Left Needle Position
and the Guide
To make the straight stitches in blind hem stitch
longer
Program a combination of patterns 06 and pattern 17 or
18 in the Mode 3.
Two straight stitches will be added to the blind hem stitch
when combining with the pattern 06.
Four stitches will be added with the pattern 17.
1 Pattern 06
2 Pattern 17
NOTE:
To alter the needle drop position of the programmed
pattern combination, shift the cursor under pattern 06
and press the stitch width adjusting button.
LCD screen will be changed to A.
It is not necessary to adjust the needle drop position of
the pattern 17 as it will synchronously change.
3 Cursor
1
2
3
4
3
1
2
1
2
A
Janome 6600 Instruction Manual
MC6600P Owners Manual/ User Guide
To Next Page
Loading...
