EasyManua.ls Logo

Janome DC2007LE - CARE AND MAINTENANCE; Correcting Distorted Stretch Patterns; Replacing the Light Bulb

Janome DC2007LE
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
66
q
Patchwork
Machine Settings
q Pattern: #29
w Presser foot: Satin stitch foot F
e Needle thread tension: 1–4
Applique Sewing
Sew the seam with straight stitch and press seam
allowance to open. Sew pattern #29 on the right side
of garment centering over the seam line.
Machine Settings
q Pattern: #28
w Presser foot: Satin stitch foot F
e Needle thread tension: 1–4
Place the applique on the fabric and baste it in place.
Sew, guiding the edge of the applique along the slit
on the foot, so that the needle falls off the edge of the
applique when it swings to the right.
q Slit
NOTE:
When changing the sewing direction at a corner or
curve, lower the needle into the applique at the left
swing and turn the fabric to a new direction.
q we
q we

Table of Contents

Related product manuals