46
z x c v b
n m
Button Sewing
q Stitch pattern:
w Needle thread tension: A
e Presser foot: Satin stitch foot: F
r Feed dog: Dropped
qwer
z Place the button so the holes of button matches to the
horizontal slot on the presser foot.
x Lower the foot to hold the button in place.
c Press the stitch width button (“+” or “–”) so the needle
will enter the left hole of the button q.
v Turn the handwheel so that the needle will enter the
right hole of the button w. Readjust the stitch width if
necessary.
b Stitch several times.
n After you finish sewing, cut the thread but leave
3" to 4" of thread at the button.
m With a hand sewing needle, draw the top thread to
the reverse side of the fabric and knot the threads.
q Left hole of the button
w Right hole of the button
* After the button sewing is completed, raise the feed
dogs for normal sewing.
Janome DC4030 Instruction manual
DC4030 Owners Manual/ User Guide
To Next Page
Loading...
