72
Adjusting Pattern Balance
If the stretch patterns are uneven when you sew on a
particular fabric, adjust them with the feed balancing dial.
q Feed balancing dial
w Standard setting mark
e Indication line
* The machine comes with the feed balancing dial set in
the position as shown.
q
w
e
(1)
(2)
(1) When patterns are too compressed, correct by
turning the dial in the direction of “+”.
(2) When patterns are too drawn out, correct by
turning the dial in the direction of “–”.
NOTE:
Turn the feed balancing dial slightly as it is very
sensitive.
• Adjusting distorted stretch stitch patterns
Janome DC4030 Instruction manual
DC4030 Owners Manual/ User Guide
To Next Page
Loading...
