9
Winding the Bobbin
Horizontal Spool Pin
Lift up the spool pin. Place the spool of thread on the
spool with the
thread coming off the spool as shown.
Attach the large spool holder pressing it rmly against
the thread spool.
* The small spool holder is used with narrow or small
thread spools.
Additional Spool Pin
The additional spool pin is used to wind extra bobbins
without unthreading the machine.
To use, insert the additional spool pin in the hole.
Place the felt and the spool on the pin.
Removing the Bobbin
Gently slide the hook cover plate release button to the
right, and remove the cover plate.
Lift out the bobbin.
To Next Page
Loading...
