Janome Horizon MC8900 QCP Special Edition User Manual

27
Customizing Machine Settings
You can customize the machine settings to your
preference.
Press the set key and the LCD screen will show the
machine setting window.
q Set key
w Machine setting window
To close the machine setting window, press the cross
mark.
e Cross mark
Turn the jog dial to select the desired item to set and
press the confirm button
r Jog dial
t Confirm button
q
w
e
r
t
Screen brightness
The screen brightness can be adjusted from level 0 to 20.
The preset level is 10.
Turn the jog dial to adjust the screen brightness.
Press the confirm button to register the new setting.
Buzzer sound
The level of the buzzer sound can be adjusted and you
can mute the buzzer in normal operation.
Turn the jog dial to select the desired sound level; mute,
low normal or loud.
Press the confirm button to register the new setting.
You can select the desired level by also pressing a sound
level icon with the touch panel stylus.
NOTE:
Items and settings can also be selected by pressing
the relevant icon on the LCD screen.

Janome Horizon MC8900 QCP Special Edition Specifications

General

Maximum Stitch Width	9mm
Maximum Stitch Length	5mm
Needle Threading System	Automatic
Display	LCD Touchscreen
LCD Screen	Yes
Knee Lifter	Yes
Start/Stop Button	Yes
Needle Up/Down	Yes
Thread Cutter	Automatic
Speed Control	Yes
Drop Feed	Yes
Free Arm	Yes
Type	Computerized
Sewing Speed	1000 stitches per minute
Lighting	LED
Presser Feet	Included
Warranty	25 years