Janome Horizon MC8900 QCP Special Edition - Buttonhole Types Overview; Introduction to Buttonholes

51
Changing the needle drop position
Press the stitch width adjusting key.
The LCD screen shows the distance between the left
needle position and the guide in millimeters r.
→ ←
e
r
q
r
w
Press the “ ” sign to move the needle to the right.
Press the “ ” sign to move the needle to the left.
q Left needle drop position
w Right needle drop position
e Guide on foot
r Distance between the left needle position and the
guide
NOTE:
The stitch width of patterns 16 and 17 cannot be
changed, but the needle drop position will move.