55
v
b
y
u u u
i
ii
v Lower the buttonhole foot and pull down the
buttonhole lever as far as it will go.
t Buttonhole lever
NOTE:
Use the stabilizer plate when sewing thick fabrics or
sewing across hems (refer to page 58).
NOTE:
Make sure there is no gap between the slider and
front stopper, otherwise the buttonhole will be out of
position or the left and right lengths will be different.
y No gap
u Starting point
i Gap
b Start sewing while pulling the needle thread lightly to
the left. After sewing a few stitches, free the thread
and continue sewing.
t
To Next Page
Loading...
