7
SERVICE ACCESS
REAR COVER
TO REMOVE:
1. Remove the face cover and front cover. (See page 5)
2. Loosen the setscrews (A), (B) and (C), and remove setscrews (D), (E) and (F).
3. Pull up the spool pins. Remove the machine socket. Remove the rear cover clearing the presser foot lifter
from the slit on the cover.
TO ATTACH:
4. Follow the above procedure in reverse.
(A)
(B)
(C)
(F)
Rear cover
(D)
(E)
To Next Page
Loading...
