Janome JW8100 - Stitch Adjustments; Altering Needle Drop Position; Altering Stitch Length

22
(7.0)
(3.5)(0.0)
Altering the Needle Drop Position
The needle drop position can be altered for straight stitch
patterns 00 to 04, 55 and 56.
Press the mode key q until the cursor w appears under
the stitch width value.
Press the “–” sign on the value set key to move the
needle to the left.
Press the “+” sign on the value set key to move the
needle to the right.
q Mode key
w Cursor
e Value set key
q
w
e
Altering the Stitch length
The stitch length can be altered.
Press the mode key q until the cursor w appears under
the stitch length value.
Press the “+” sign on the value set key to increase the
stitch length.
Press the “–” sign on the value set key to decrease the
stitch length.
q Mode key
w Cursor
e Value set key
w
e
q