9. STRETCH STITCH SELECTOR CAM
Check : 1. Set pattern selector dial at (A) and (D).
2. Sewing (A) and (D) pattern.
3. Sewn-out look (A) and (D), stitch length must
be same.
Adjustment : 1. Remove rear cover.
2. Set pattern select dial at (A) position.
3. Loosen two set screw (Hexagon M4x4) (E)
and (F).
4. Turn SS selector cam (G) up to distance
above 1 mm of pin (H) and SS selector
cam end.
5. Then tighten (E).(F) two set screw.
MODEL : JANOME 7312
E
F
H
G
E
F
G
H
A
B
C
D
1.
0
m
m
10
D
C
B
A
To Next Page
Loading...
