Janome MC15000 - Changing External Parts; Face Cover; Belt Cover

1
Changing External Parts (1)
Face cover
To remove:
1. Open the face cover.
Disconnect the connector.
2. Remove the setscrews A (2 pcs.).
Remove the face plate.
To attach:
1. Follow the above procedure in reverse.
Belt cover
To remove:
1. Remove the caps.
2. Remove the setscrews A and B.
Connector
Face cover
Cap(s)
A
C
B
D
3. Loosen the setscrew C.
4. Loosen the setscrew D.
Remove the belt cover.
To attach:
1. Follow the above procedure in reverse.
A