Janome MC15000 - Base Plate; Base Cover; Bed Cover

3
Base plate
To remove:
1. Remove the setscrews A (3 pcs.).
2. Remove the setscrews B (2 pcs.).
3. Remove the base plate.
To attach:
1. Follow the above procedure in reverse.
Changing External Parts (3 )
A
A
A B
B
Base cover
To remove:
1. Remove the extension table.
Remove the setscrews A (4 pcs.).
Remove the setscrews B (3 pcs).
Remove the base cover.
To attach:
1. Follow the above procedure in reverse.
Base plate
Bed cover
To remove:
1. Remove the extension table.
Remove the setscrews A (2 pcs).
Remove bed cover.
To attach:
1. Follow the above procedure in reverse.
A
Bed cover
A
A
B
Base cover
B