43
39.6 mm
Presser foot lifter
stopper
Mechanical adjustment
Presser foot lifter stopper position (3)
To adjust:
1. Turn the handwheel toward you to lower the needle.
Raise the presser foot lifter.
Loosen the hexagonal socket screw of the presser foot
lifter stopper from the front side of the machine.
2. Adjust the distance between the presser foot spring release
base and the presser foot lifter stopper to 39.6 mm.
Tighten the hexagonal socket screw.
Front side of the machine
Needle bar
Hexagonal socket
screw
Presser foot lifter
stopper
Presser foot spring
release base
To Next Page
Loading...
