6
Changing External Parts (6)
Connector
A
Face cover
B
Rear cover
To remove:
1. Remove the belt cover, top cover and base cover (see
page 1, 2 and 3).
2. Open the face plate and disconnect the connector.
3. Loosen the setscrews A and B.
4. Remove the setscrews C (2 pcs.) and D (2 pcs).
C
D
E
5. Press down the rear cover through the holes E to unlatch
the front cover.
6. Remove the rear cover.
To attach:
1. Follow the above procedure in reverse.
To Next Page
Loading...
