Janome Memory Craft 8900QCP - Lockout Key; Changing the Presser Foot

AAASewing.com
13
Changing the Presser Foot
CAUTION:
Always make sure to press the lockout key to lockout
the machine or turn the power switch off before
replacing the presser foot.
Raise the needle to its highest position and raise the
presser foot lifter.
Press the black lever on the back of the foot holder.
The presser foot will drop off.
q Lever
w Presser foot
Lockout key
Press this key to lockout the machine when threading the
machine, replacing the accessories etc.
To reduce the risk of injury, all the buttons and keys are
deactivated.
q
u
w
Attaching the presser foot
Place the presser foot so that the pin on the foot lies just
under the groove of the foot holder.
Lower the presser bar to lock the foot in place.
Each foot is marked with an identication letter.
r Groove
t Pin
y Presser foot
u Identication letter
y
r
t
To unlock the machine, press this key again.
Janome MC8900 Instruction Manual
Janome Quilting & Sewing Machine
www.aaasewing.com
MC8900 Owners Manual/ User Guide