24
The stitch patterns are classied into 11 groups and
monogramming.
To select the desired stitch pattern, refer to the reference
chart inside the top cover to identify the stitch group and
pattern number.
q The stitch patterns that start with “D” (for example, D1,
D2 or D94) can be sewn with the dual feed foot AD.
w The stitch patterns end with “S” (for example, D1S,
D2S, D3S or D4S) can be sewn with the needle plate
for straight stitch.
e The stitch patterns shaded with red can be turned over
vertically (refer to page 86).
Selecting the Patterns
z When turning the power switch on, the LCD screen
will show the straight stitch D1 selected.
Press the mode key and the group selection window
will open.
q Mode key
w Group selection window
q
w
x Turn the jog dial or press the edit key to browse
through the groups.
e Jog dial
r Edit key
NOTE:
To close the group selection window, press the cross
mark with the touch panel stylus.
t Cross mark
c Press the conrm button in the center of the jog dial to
select the group enclosed with a frame, or press the
icon of the desired group with the touch panel stylus.
y Conrm button
u Touch panel stylus
e
t
y
u
q
w
e
r
z
x
c
To Next Page
Loading...
