44
Gathering
Machine settings
q Pattern: D1
w Thread tension: 1
e Presser foot: Zigzag foot A
r Foot pressure: 5
q
e
w
r
Pintucking
Machine settings
q Pattern: D4
w Thread tension: AUTO
e Presser foot: Blind hem foot G
r Foot pressure: 5
q
e
w
r
Fold the fabric with the wrong sides together.
Place the folded fabric under the blind hem foot.
Align the edge of the fold with the guide on the foot, and
lower the foot.
Sew while guiding the edge of the fold along the guide.
Open the fabric and press the tuck to one side.
Loosen the thread tension to “1” and increase the stitch
length to 5.0.
Sew two rows of straight stitches 0.6 cm (1/4) apart.
Knot the threads at the beginning.
Pull the bobbin threads at the end to gather the fabric.
Knot the threads at the end and distribute the gathers
evenly.
0.6 cm
To Next Page
Loading...
