13
z
c
x
Drawing up the Bobbin Thread
z Raise the presser foot and hold the needle
thread lightly with your left hand.
q Needle thread
x Turn the handwheel slowly toward you one
complete turn. Bring the bobbin thread up by
pulling the needle thread as illustrated.
w Bobbin thread
c Pull 4˝ (10 cm) of both threads back and under
the presser foot.
z
c
x
Needle Threader
z Raise the needle to its highest position.
Pull down the needle threader knob as far as it
will go.
q Threader knob
x Turn the knob in the direction of the arrow in
the illustration, then insert hook into the needle
eye.
Lead the thread around guide and under hook.
w Hook
e Guide
c Turn the knob in the direction of the arrow in
the illustration, drawing the thread loop through
the needle.
Gently let the needle threader goes up to pull
the thread loop up. Pull the thread through the
needle eye.
NOTE:
The needle threader can be used with a #11
to #16 needle or a blue tipped needle. Thread
size 50 to 90 should also work well.
q
w
e
q
w
q
To Next Page
Loading...
