Janome MS5027PR - Base Plate; Bed Cover

8
MS5027PR
SERVICE ACCESS
BASE PLATE
(TO REMOVE)
1. REMOVE THE FOUR SETSCREWS (A) AND REMOVE THE BASE PLATE (B).
(TO ATTACH)
2. FOLLOW THE ABOVE PROCEDURE IN REVERSE.
BED COVER
(TO REMOVE)
1. REMOVE THE TWO SETSCREWS (D) AND REMOVE THE BED COVER (E).
* WHEN YOU REPLACE THE BED COVER, SET THE FEED DROP LEVER (F) IN
THE LEFT POSITION.
(TO ATTACH)
2. FOLLOW THE ABOVE PROCEDURE IN REVERSE.
(A)
(A)
(A)
(A)
(B)
(D)
(E)
(F)