26
MS5027PR
MECHANICAL ADJUSTMENT
BUTTONHOLE STITCH BALANCE
TO CHECK:
1. SET THE MACHINE AS FOLLOWS:
STITCH SELECTOR:
STITCH LENGTH CONTROL: BLUE ZONE
STITCH WIDTH CONTROL: 6.5
2. ATTACH THE AUTOMATIC BUTTONHOLE FOOT.
3. SEW A BUTTONHOLE, AND CHECK THE STITCH BALANCE BETWEEN THE RIGHT AND LEFT
SIDES OF THE BUTTONHOLE.
4. THE CORRECT BUTTONHOLE STITCH BALANCE IS WHEN THERE IS THE
SAME COARSE ON THE RIGHT AND LEFT SIDES OF THE BUTTONHOLE.
STITCH WIDTH CONTROL
SELECTED PATTERN
STITCH LENGTH CONTROL
To Next Page
Loading...
