11
MS5027PR
SERVICE ACCESS
REAR PANEL
(TO REMOVE)
1. OPEN THE FACE COVER.
2. REMOVE THE TOP COVER UNIT (SEE PAGE 7), THE BELT COVER (SEE PAGE 9) AND THE FRONT
COVER (SEE PAGE 10).
3. REMOVE THE SETSCREWS (A), (B), AND (C), AND LOOSEN THE SETSCREWS (D), (E) AND (F).
4. LOWER THE PRESSER FOOT LEVER, AND PULL AWAY THE REAR PANEL UNIT FROM THE
MACHINE FRAME. TWIST AND REMOVE THE ARM COVER PART FROM THE PRESSER FOOT
LEVER.
(TO ATTACH)
5. WHEN YOU REATTACH THE REAR PANEL, PUT THE “WINDOW” ON THE PLASTIC PANEL OVER
THE PRESSER FOOT LEVER, AND THEN REPLACE THE SIX SCREWS.
(A)
(B)
(C)
(D)
(E)
(F)
TWIST AND REMOVE THE ARM COVER
PART FROM THE PRESSER FOOT LEVER.
PRESSER FOOT LEVER
REAR PANEL UNIT
To Next Page
Loading...
