Janome MS5027PR - Page 22

20
MS5027PR
MECHANICAL ADJUSTMENT
STRETCH STITCH BALANCE
ADJUSTMENT PROCEDURE:
1. REMOVE THE CAP (F).
2. IF THE REVERSE STITCH LENGTH (B) IS SHORTER THAN THE FORWARD STITCH LENGTH (A),
TURN THE ADJUSTING SETSCREW (E) IN THE DIRECTION OF (C).
IF THE REVERSE STITCH LENGTH (B) IS LONGER THAN THE FORWARD STITCH LENGTH (A),
TURN THE ADJUSTING SETSCREW (E) IN THE DIRECTION OF (D).
(C)
(D)
(E)
(F)