Janome Skyline S7 - Program Key; Mirror Image of Patterns

25
t y u
i o
t Program key
Press this key to program a pattern combination.
When this key is pressed, the delete key, mirror image
keys, save le key and cursor keys will appear.
y Vertical mirror image key
Press this key to sew a vertical mirror image of the
selected pattern (refer to page 58).
u Horizontal mirror image key
Press this key to sew a horizontal mirror image of the
selected pattern. The key is grayed out if the selected
pattern cannot be turned over (refer to page 58).
i Delete key
Press this key to delete the pattern from the pattern
combination.
o Save le key
Press this key to save the pattern combination as a le.
!0 Cursor keys
Press one of the cursor keys to move the cursor up or
down.
!0
!0
!1 !2
!1 Letter size key
Press this key to select the full size (L) or small size (S).
!2 Letter case key
Press this key to select upper case or lower case for
monograms.