Janome Skyline S7 - Language Selection Mode; Correcting Distorted Stitch Patterns

91
!0
!1
!2
!3
!1 Favorite Stitch Adjustment
If you wish to save the changes to manual stitch settings,
turn on this option by pressing the ON key.
If this option if turned off, the manual stitch setting will be
cleared when turn the power switch off.
Press the delete icon
!3
to clear the manual stitch
setting.
NOTE:
This option is available for all stitches in ordinary
sewing mode except monogram.
!0 Thread Cut after Auto-Lock
The machine automatically trims the threads after sewing
locking stitches when this option is turned on.
!2 Resume Mode
Turn on this option when you wish to resume the last
pattern sewn before turning the power switch off.
When the power is turned on again, the conrmation
message will appear. Press the OK key to resume the
last pattern.
NOTE:
Resume data will be cleared under the following
conditions:
• Created stitch is imported with the import key.
• Created stitch is deleted with the delete key.
• The internal memory is formatted.
After customizing the settings, press the OK key to
enable the new settings.