Janome YC-482J-EC - Stitch Selector Dial

11
q
Stitch Selector Dial
Turn the stitch selector dial to set the setting mark
with the symbol corresponding to the desired
pattern.
q
Setting mark
CAUTION
To avoid needle or fabric damage, make sure
the needle is up and out of the fabric while
selecting a stitch.
Turn the stitch length dial to set the setting mark
with the desired stitch length.
The higher the number, the longer the stitch
length.
q
Setting mark
•Adjustthedialinthe0.5–4rangewhenyou
sew the zigzag stitch.
•Setthedialat“S.S.”tosewthestretchstitch 
pattern sewing.
•Ifthestretchstitchpatternisuneven,turn 
thestitchlengthdialinthedirectionof“–”to 
compressit,or“+”toexpandit.
Stitch Length Dial
S.S.
q
+ –
Turn the stitch width dial to set the width at the
setting mark.
The higher the number, the wider the stitch width.
q
Setting mark
Stitch Width Dial
NOTE:
Raise the needle above the fabric when turning
the stitch width dial.
1
2
4
3
5
0