EasyManua.ls Logo

Janome YC-482J-EC - SECTION V. DECORATIVE STITCHING; Shell Tuck; Smocking

Janome YC-482J-EC
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
q w e
q
Smocking
q
Pattern selector: A/B and D
w
Presser foot: Zigzag foot
e
Thread tension: 1–4
r
Stitch length: S.S.
t
Stitch width: 5
Withthestitchlengthat“4,sewstraightstitching
lines 1 cm (3/8˝) apart, across the area to be
smocked.
Knot the threads along one edge. Pull the bobbin
threads and distribute the gathers evenly.
Secure the threads at the other end.
Sew the decorative stitch between the gathering
stitches.
Pull out the gathering stitches.
q 3/8˝ (1 cm)
w
e
q
Use a lightweight fabric (tricot, for example).
Fold and stitch on the bias.
When the needle swings to the right, allow the
needle to just clear the folded edge of the fabric.
After stitching, open the fabric and iron press
the tucks flat to one side.
NOTE:
Increase the needle thread tension to form
prominent tucks.
SECTION V. DECORATIVE STITCHING
Shell Tuck
q Pattern selector: G
w Presser foot: Zigzag foot
e Thread tension: 68
r Stitch length: 2–3
t
Stitch width: 5
1
2
4
3
5
0
r t
1
2
4
3
5
0
r t

Related product manuals