-8-
1.6 How the buttons on the steering wheel work?
A:If your order is not include canbus, Please go to Steering Learning - follow the
instructions to complete the steering learn.
Steering wheel learning steps:
1) Press any button on the steering wheel, the interface will display, please press
and hold a direction button. If you do not press the button on the steering wheel
within a certain period of time, the learning will fail.
2) Click on the screen to learn the function of docking.
3) Press the corresponding function button on the steering wheel.
Repeat the operation until all the control buttons on the steering wheel have
been learned.
Please refer this video:
https://www.youtube.com/watch?v=O34gzkP1zPQ
Rear camera definition setting:
1.Click "Car Settings" 2.Click "Reversing"
3.Choose the right camera format.
This is the connection principle of the rear camera. In most cases, it can be completed
by directly connecting Back (Reverse) trigger line.
If there is no Back (Reverse) trigger line, then it is triggered by CANBUS, you need to
set CANBUS, of course, there are some exceptions, please contact us!
To Next Page
Loading...
Need help?
General