A: Need to connect the machine to the network to update the CANBUS library, check or reset CANBUS.
Q: Why is there no original car setting when CANBUS is included, or the original car has
abnormal functions?
A1: If you have an RCA cable, please connect the RCA AMP CTRL cable and AMP CONT cable
together, and the sound will work normally. Please refer to the figure below,
Q: How to wire Outlander 2 2005-2011/Lancer 2007-2013 with Rockford amplifier:
A2: If there is no RCA cable, please find the AMP CTRL cable and connect it to the ACC cable (red),
just remove the plastic and it will not cut. Please refer to the figure below,
-25-
To Next Page
Loading...
Need help?
General