3
HANDLE WITH CARE - DO's & DON'T's
FAILURE TO ADHERE TO THE ABOVE CONDITIONS WILL RESULT IN PERSONAL INJURY OR
PRODUCT DAMAGE NOT
COVERED UNDER JANUS INTERNATIONAL PRODUCT WARRANTY.
ALWAYS HANDLE PRODUCT WITH CARE
, AND REVIEW ALL INSTRUCTIONS, WARNINGS, AND
NOTES BEFORE INSTALLING PRODUCT.
REVIEW DOOR ASSEMBLY AND GENERAL PARTS DESCRIPTIONS BILL OF MATERIAL FROM PAGE
4, FIGURE 1 TO FAMILIARIZE YOURSELF WITH COMMON PARTS OF ROLLING SHEET DOOR
ASSEMBLY.
DOOR ASSEMBLIES ARE MANUFACTURED PER OPENING WIDTHS AND HEIGHTS SPECIFIED AT
TIME OF ORDER. JANUS INTERNATIONAL WILL NOT
BE HELD RESPONSIBLE FOR OPENING
WIDTHS OR HEIGHTS THAT DO NOT MATCH THOSE SPECIFIED AT TIME OF ORDER.
DON'T's
• DO NOT - STAND ON PRODUCT.
• DO NOT - CLIMB ON PRODUCT.
• DO NOT - WALK ON PRODUCT.
• DO NOT - DROP PRODUCT.
• DO NOT - SLIDE PRODUCT ACROSS ANY SURFACE.
• DO NOT - THROW OR TOSS PRODUCT.
• DO NOT - SET OR STACK PRODUCT ON GRAVEL,
DEBRIS, OR UNEVEN SURFACES.
• DO NOT - ALLOW SHARP OBJECTS TO COME IN
CONTACT WITH PRODUCT.
• DO NOT - LEAVE PRODUCT UNSECURED WHILE IN
TRANSIT OR DURING INSTALLATION.
DO's
• CAREFULLY INSPECT ALL PRODUCT FOR
DAMAGE UPON RECEIPT.
• USE PROTECTIVE FOAM BETWEEN
PRODUCT AND ANY SURFACE OR OBJECT IT
MAY COME INTO CONTACT WITH WHILE
IN
TR
ANSIT AND/OR STORAGE.
• WHEN SECURING PRODUCT FOR TRANS
IT,
U
SE FOAM BARRIER BETWEEN P
RODUCT
AND STRA
PS, ROPES, ETC.
• CAREFULLY UNLOAD
PRODUCT FROM ANY
TY
PE OF CRATING MATERIAL ASSURING NO
CONTACT WITH FASTENERS O
R SHARP
EDGES
.
• CLEAR FLOOR AT OPENING OF ALL DEBRI
S
BEFOR
E INSTALLING PRODUCT.
• SINGLE PERSON LIFTING OF PRODU
CT
C
OULD CAUSE INJURY. U
SE ASSISTANCE
WHEN M
OVING OR LIFTING.
• INSTALL PRODUCT WITH APPROPRIAT
E
LIFTING
EQUIPMENT ASSUR
ING A
PROTECTIV
E BARRIER IS MAINTAI
NED
BETWEEN
PRODUCT AND ANY SURFACE OR
OBJECT IT MAY COME INTO
To Next Page
Loading...
Need help?
General
