Need help?Do you have a question about the Janus FM-200 Sv Series and is the answer not in the manual?
General| Agent | FM-200 (HFC-227ea) |
|---|---|
| Type | Clean agent fire suppression system |
| Cylinder Material | Steel |
| Operating Pressure | 25 bar (360 psi) |
| Approvals | UL, FM |
| Nozzle Types | 360-degree, 180-degree |
| Application | Data centers, telecommunication facilities, museums, archives |
| Operating Temperature Range | -20°C to 50°C |
| Storage Pressure | 25 bar (360 psi) |
| Discharge Time | 10 seconds |
| Applications | Data centers, telecommunication facilities, museums, archives |
| Extinguishing Method | Chemical suppression by heat absorption and breaking the fire triangle |
Covers safety aspects, exposure limits, and handling precautions for FM-200®.
Describes the cylinder, dip tube, and valve assembly.
Lists components that complete the system setup regardless of cylinder count.
Components used to disperse the FM-200® agent into the protected area.
Identifies unique requirements of the area to be protected.
Calculates the required amount of FM-200® agent based on volume and concentration.
Specifies requirements for locating cylinders in a climate-controlled, accessible, and vibration-free area.
Determines nozzle placement, arrangement, and selection based on hazard configuration.
Covers the physical installation of system components like brackets and piping.
Details the procedures for electrical wiring and component installation.
Verifies system installation and operation through checks like room integrity tests.
Procedures for removing, cleaning, refilling, and pressurizing cylinders.
To Next Page