Jasic MIG160PFC - Control Panel; Overview

Page 26
6. Control panel
6.1. Overview
(OPERATOR PANEL)
Note! Some models do not support "h. Remote control function" and "g. Push/spool
torch selector". Please confirm with the seller whether the machine supports relevant
functions before purchasing.
a.Parameter display A
b.Parameter display B
c.Welding mode selector
d.Welding type selector
e.Welding wire diameter
selector
f.MIG/Lift TIG operation
mode selector
g.Push/spool torch selector
h.Enable remote control
i.Synergic
j.Inching feeding
k.Gas check
l.Parameter adjustment
knob A
m.Parameter adjustment
knob B
n.Alarm/protection indicator
o.VRD indicator