Page 28
d. MIG type selection
1) In MIG mode, press the welding type selection keys to switch the welding type.
2) If the corresponding welding type indicator is on, it indicates that the welding type has been
selected.
e. Selection of MIG welding wire diameter selection
1) In MIG mode, press the corresponding function switching key to select an optional
welding wire diameter for the welding type.
2) If the corresponding welding wire diameter indicator is on, it indicates that the welding wire
diameter has been selected.
f. Selection of 2T/4T operation mode
1) In MIG or Lift TIG mode, press the corresponding function switching key to select 2T
or 4T operation mode.
2) If the indicator is on, it indicates that the machine is in 2T operation mode.
3) If the indicator is on, it indicates that the machine is in 4T operation mode.
g. Selection of push/spool torch
In MIG mode, press the corresponding function switching key to select the push torch or
To Next Page
Loading...
