Page 12
◆ MMA hot start function: Makes MMA arc ignition easier and more reliable.
◆ Lift TIG is controlled by the torch switch.
◆ On-demand fan: Prolongs the fan lifespan and reduces internal dust accumulation.
◆ Parameters are automatically saved before shutdown, and the settings are restored after
starting again.
◆ Supports factory reset function.
◆ Standby function: In MIG and Lift TIG mode, the machine automatically enters standby
state if it is not used for a long time.
◆ Optional wired handheld remote controller and wireless remote controller.
Note: The standard HD digital screen version does not support numeric key-type
push torch, push-pull torch and spool torch functions; no remote controll function.
To Next Page
Loading...
