Jasic MIG200PFC - Description of Symbols

Page 9
2. Description of symbols
Warning! Read the Manual
Electric shock risk warning
WEEE tag
Current unit "A"
Wire feed speed unit "m/min"
Thickness of welding base metal "mm"
Voltage unit "V"
"Inductance" of MIG / "Arc force" of MMA
MIG burn back time unit "ms"
Overheat protection indicator
Overcurrent protection indicator
VRD function indicator
MMA mode
MIG mode
Lift TIG mode
Welding mode selector
Mixed gas welding (80%Ar+ 20%CO
2
) of carbon steel
Mixed gas welding (80%Ar+ 20%CO
2
) of flux-cored carbon steel
Self-shielded welding of carbon steel
100%Ar welding of aluminum magnesium alloy
Mixed gas welding (98%Ar + 2%CO
2
) of stainless steel
Welding type selection: welding base metal and gas selection