Jasic MIG200PFC - Touchless LCD Screen

Page 34
6.2. Touchless LCD screen
6.2.1 Overview
(LCD screen operation panel)
a
LCD screen
Display all human-computer interaction information
b
Home key
Press the key to directly return to Home page.
This key is invalid on Home page.
c
Master
encoder
Adjust most of the parameters and select options on the LCD screen:
The knob can be used to adjust all parameters, switch among pages or
options, and control the display content on the LCD screen.
Master
encoder key
Select most of the menus or parameters on the LCD screen: This key
can be used to switch among different menu levels or select
parameters.
d
Parameter
adjustment
knob A
Current/wire feed speed encoder: It can be used to adjust the welding
current in SynMIG or wire feed speed in MIG.
e
Back key
Return to the upper-level menu.
f
Parameter
adjustment
knob B
Voltage/arc length encoder: It can be used to adjust the welding
voltage or arc length in SynMIG or MIG.
a
b
c
d
e
f