Jasic MIG200PFC - Page 48

Page 48
as operation mode, welding torch, etc.
functions, please
refer to Section 6.1.3.
Factory reset
① The welding parameters in all welding modes;
② The function options in all welding modes, such
as operation mode, welding torch, etc.
③ The parameters in all storage channels;
④ Language and unit system.
For the default values
of all welding
parameters and
functions, please
refer to Section 6.1.3.
4. Unit System Setting
There are two unit system options, i.e. "Metric System" and "Imperial System". The
parameters related to the unit system conversion in this series of models include:
(1) Wire feed speed: Metric system: m/min, Imperial system: in/min (values are expressed as
decimals, reserving 1 decimal place).
(2) Welding wire diameter: Metric system: mm, Imperial system: in (abbreviated as ", values
are expressed as decimals, reserving 3 decimal places, such as 0.030").
(3) Plate thickness: Metric system: mm, Imperial system: in (values are expressed as
fractions).
5. Language Setting
The "Language Setting" function is unique to the LCD screen. This series of models are
available in various languages, and the available languages are constantly updated and
added.