Jasic TIG Series - Page 2

2
Your new product
Thank you for selecng this Jasic product.
This product assembly manual has been designed to ensure that you get the most from your new
product. Please ensure that you are fully conversant with the informaon provided paying parcular
aenon to the safety precauons which can be found in the Jasic machine operang manual. The
informaon provided within the assembly manual and the product operang manual will help protect
yourself and others against the potenal hazards that you may come across.
Please ensure that you carry out daily and periodic maintenance checks to ensure years of reliable and
trouble free operaon.
Please call your Jasic distributor in the unlikely event of a problem occurring.
Please record below the details from your product as these will be required for warranty purposes (if
applicable) and to ensure you get the correct informaon should you require assistance or spare parts.
Date purchased ________________________________________
From where ________________________________________
Serial number ________________________________________
The serial number (if applicable) is normally located on the top or underside of the machine and will
begin with AA) and for further informaon on your Jasic product warranty registraon please visit:
www.jasic-warranty.co.uk
Disclaimer
Whilst every eort has been made to ensure that the informaon contained within this manual is
complete and accurate, no liability can be accepted for any errors or omissions.
Please note:
Products are subject to connual development and may be subject to change without noce.
Regularly check our product pages at www.Jasic.co.uk for revision updated operang manuals.
No part of this manual may be copied or reproduced by any means without the wrien permission of
Wilkinson Star Limited.