Jasic TIG Series - Page 3

3
TIG TROLLEY COMPATABILITY
These assembly instrucons are suitable for the following Jasic TIG welding packages:
JT-202A-WC
JT-202D-WC
JT-300P-WC
JT-315MWD-WC
CONTENTS
Check the trolley packaging for any signs of damage.
Carefully remove all the components, check that all parts are present and retain the packaging unl the
assembly is complete.
Kit Contents:
1 x Base Unit (assembled) 2 x Cylinder Chain/Straps 2 x Side xing brackets
1 x Upright Cylinder Support 2 x Top Shelf Brackets 1 x Top unit (with handle)
6 x M5 Screws 10 x M10 Screws 12 x M6 Screws
Please Note: This kit is used for other machine packages, you may note that extra screws are supplied and
as a result there may be some screws le over once you have fully assembled the trolley package.
For the following instrucons we have used the Jasic JT-315 ACDC Mul Wave TIG power source and
cooler as shown below.