68
generally there is no 12V power to the drive motor. The
motor is equipped with a hex drive override shaft.
This drive can be activated using an electric drill and the exible shaft provided with each
unit (or use a ratchet to actuate the motor) to pull the room in or out.
1. Locate the included exible shaft in your
owner’s packet.
2. Attach exible shaft to the 1/4” hex tting
on the end of the motor.
3. Attach 1/4” socket & ratchet, or drill to the
other end, and turn in the proper direction
to move the room.
4. If the cables tighten, and the motor
is dicult to turn, REVERSE THE
DIRECTION.
To Next Page