144
APPLIANCES
Open the (2) folding arms on the bracket making sure they lock in position.
Slide the grill onto the (2) arms against the stops. Make sure the grill is fully on the
arms.
Insert the retaining pins into the arms.
To remove the grill, remove the retaining pins and simply slide it off of the bracket
arms. Wait until grill has cooled down before removing it.
Gas BBQ Grill Prep (if so equipped)
Your recreation vehicle may be equipped with a propane “quick-coupler” connection and
support bracket for easy installation of the BBQ grill
Attaching the “quick coupler” connection
The “quick coupler” is directly connected to the RV propane system. The “quick-coupler”
connection is equipped with a positive shut-off valve.
Place the “quick coupler handle in the OFF position and push back the sleeve. The valve
handle must be OFF to make the connection.
1. Insert the plug and release the sleeve.
2. Push the plug until the sleeve snaps forward, locking the plug into the socket.
3. 7XUQWKHKDQGOH21WRDOORZSURSDQHWRÀRZWRWKHGURSLQVWRYH
Gas Grill & Mounting Bracket
Bracket on Support Rail
Quick Coupler Connection
To Next Page
Loading...
