153
ELECTRONICS
Retracting the TV for storage
1. Rotate the TV back into the storage position so the T-handle locks back in place to keep
the TV from pivoting (E).
2. Push the TV into the storage compartment taking care not to get the power cord or the
antenna cable caught in the mechanism.
3. Push it all the way back into the compartment until it stops. Firmly push it into place
until the yellow tipped lever locks it in place. You will hear it click when you have it
latched properly.
NOTE: The TV does not lock into place when it is in this pivoting
position.
To Next Page
Loading...
