Jazz HDV146 - Using Your Video Recorder; Powering the Recorder On and Off; Switching Recording Modes

14
3. Using your video recorder
Turning the recorder ON and OFF
1. Press the POWER button for 2 to 3 seconds to turn ON video
recorder.
2.
Press the POWER button again to turn OFF the recorder.
To save battery power, the recorder automatically turns off after a short
period of time if no button has been activated. Press the POWER button to
power the camera back ON. You can change the power-OFF time by
setting the function [Power Save] in the Setup menu.
Change the MODE of the recorder
Your video camera has three selectable modes: Video, Capture and
Playback mode.
1. Press the POWER button and the camera will become active and set
in Video Recording Mode (default mode).
2. Press the MODE button once to select the Capture mode for taking