16
• The LCD monitor will display the elapsed time of recorded video.
Taking still images
1: Turn ON the video recorder.
2: Set the video recorder to capture mode, the icon
appears on the
LCD screen.
3: Use the LCD screen to frame your subject.
4: Hold the video recorder steady and press the SHUTTER button to take
a picture. Press right button to turn ON LED light to brighten subject if
needed. Press again to turn OFF
• The number displayed on the LCD screen will decrease with each
picture taken.
• When the “Memory Full” message appears on the LCD screen no
more pictures can be taken– replace the SD card or download
stored images into the computer.
• Make sure that your fingers do not cover the lens while recording
video or taking still images.
• Do not remove the memory card or batteries when camera is
saving the image, otherwise the data will be damaged.
To Next Page
Loading...
