JBH D26 - Guidelines and Manufacturers Statement-Electromagnetic Emission; Labeling Explanation

30
GUIDELINES AND MANUFACTURER' S STATEMENT-ELECTROMAGNETIC EMISSION
Labeling explain for Electromagnetic compatibility
Note !




Warning !


NO.
Project
Cablelength（m）
Whether or not shielded
Remark
1
POWER CORD
1.3
NO
/
2
CHARGER OUTPUT LINE
1.1
NO
/
D26
Power Wheelchair
meets the electromagnetic compatibility requirements of
IEC60601 standards.
The user shall install and use according to the EMC information provided in the
attached documents.
The portable and mobile RF communication equipment may affect the performance of
electric wheelchair and avoid strong electromagnetic interference when using, such as
close to mobile phones, microwave ovens, etc.
The guide and the manufacturer's statement are detailed in the annex.
D26
Power Wheelchair
should not be used close to or stacked with other equipment. If
Power Wheelchair should not be used close to or stacked with other equipment. If Power Wheelchair
it must be used close to or stacked, it should be observed and verified that it can oper
-
ate normally under the configuration used.
In addition to the cables sold by
D26
Power Wheelchair
manufacturers as spare parts
of internal components, the use of accessories and cables other than those specified
may result in increased emission or reduced immunity of
D26
Power Wheelchair
.
!
!
www.jbhmedical.com