Why aren't inputs 2 and 3 coming out of the JBL OUT connector?
If the inputs from INPUT 2 and INPUT 3 aren’t coming out of the OUT connector on your JBL speaker, the MIX/LOOP SWITCH might be set improperly. Set the MIX/LOOP SWITCH to the MIX OUT position (depressed).
Why does the speaker volume increase when adjusting INPUT 1 on my JBL speaker?
If the speaker connected to the OUT connector goes up in volume when you adjust the INPUT 1 control on the first JBL speaker, the MIXED/LOOP SWITCH is set improperly. Disengage the MIX OUT switch.
General| Enclosure | Polypropylene |
|---|---|
| Coverage Pattern | 90° x 60° |
| Input Connectors | XLR, 1/4" |
| LF Driver | 15" |
| Outputs | XLR |
Essential safety, mounting, and maintenance advice for EON speakers.
Overview of typical uses and the main technical features of the EON15 G2.
Detailed technical data including frequency response, SPL, dimensions, and driver specifications.
Description of XLR and 1/4" phone jacks for audio input and output.
Explanation of MIC/LINE switch, EQ, and level adjustments for optimal sound.
Understanding status LEDs and how to set the correct voltage for operation.
Setting up a simple PA system with stage monitors.
Examples for musicians using guitars, vocals, and CD players.
Systems for DJs, including use with subwoofers for enhanced bass.
Using the EON15 G2 for keyboard amplification and mixing.
Explains the differences between balanced and unbalanced audio signal types.
Details on various cables and connectors used with EON speakers.
Guidelines for positioning speakers for best sound and feedback reduction.
Visual representation of the EON15 G2's internal signal flow.
Information on product warranty coverage, terms, and service procedures.
JBL Professional contact details for customer service and support.
To Next Page
