JBL FLIP 3 Service Manual

1.3.4 Transmitter Performance @EDR Mode
Description Specification
Relative transmit power @ antenna
connector
-2 to 1 dBm
EDR Carrier Frequency Stability and
Modulation Accuracy
|ɯ
0
|<10KHz
|ɯ
i
|<75KHz
|ɯ
0
+ ɯ
i
|<75KHz
RMS DEVM<20%
99% DEVM<30%
Peak DEVM<35%
EDR differential phase encoding >=99%
1.3.5 Antenna Performance
Description Specification
Antenna VSWR Typical : 1.5 Limit : 1.7
Antenna Return Loss Typical: -14dB Limit :-12dB
Antenna Radiation Efficiency >= 40%
1.4 Hands free section
1.4.1 Test equipment
1.4.2 Audio Performance
Description Specification
Send Loudness Rating (SLR) Typical : 13dB
Limit : +/- 4dB
Receive Loudness Rating (RLR),Max >-13dB
Receive Loudness Rating (RLR),Normal Typical : 2dB
Limit : +/- 4dB
Weighted Terminal Coupling Loss (TCLw),
volume is set at Max
40dB
Weighted Terminal Coupling Loss (TCLw),
volume is set at normal
47dB
2-4

JBL FLIP 3 Specifications

General

Speaker type	-
Driver diameter	40 mm
Number of drivers	2
Number of speakers	1
Audio output channels	- channels
Impedance	- Ω
Frequency range	85 - 20000 Hz
RMS rated power	16 W
Signal-to-Noise Ratio (SNR)	80 dB
Bluetooth version	4.1
USB charging port	Yes
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
USB connector type	Micro-USB
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wireless
Battery voltage	3.7 V
Battery capacity	3000 mAh
Power source type	Battery
Battery life (max)	10 h
Battery recharge time	3.5 h
Product color	Turquoise
Protection features	Splash proof
Recommended usage	Universal
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	64 mm
Width	169 mm
Weight	450 g