JBL SUB200 - BASIC SPECIFICATIONS

Note: The SUB200 is part of the SCS200.7 system
Satellite loudspeakers SCS200SAT order JBL part# SCS200SAT-1
Center channel SCS200CEN order JBL part# SCS200/300CEN-1
- CONTENTS -
BASIC SPECIFICATIONS……………….….….….….…………….1
DETAILED SPECIFICATIONS ……..…………….……………..2
OPERATION ………….……………………………..…………….4
CONNECTIONS..………………………..………….…….………...5
BASIC TROUBLESHOOTING…..…………….….….…….……...7
TEST SET-UP AND PROCEDURE……..……….…….………….8
EXPLODED VIEW/PARTS LIST…………………………………..9
BLOCK DIAGRAM..…………………………………………….....10
PCB DRAWINGS………………..………………………………...11
ELECTRICAL PARTS LIST ……………………….……………..15
INTEGRATED CIRCUIT/TRANSISTOR PINOUTS………….19
SCHEMATICS.………..…………………………………. ………20
PACKAGING…………………………….………………………...22
BASIC SPECIFICATIONS
SUB200 Subwoofer
Configuration: Floor-firing, bass-reflex ported enclosure
Woofer: 8" (203mm) cone
Amplifier Power output: 100W Continuous RMS power
Frequency response: 35Hz – 160Hz (-6dB)
Dimensions (including feet): 16 ¼ x 11 x 13 ¾” (413 x 279 x 349mm)
Weight: 28 lb/12.7kg
Occasional refinements may be made to existing products without notice but will always meet or exceed original
specifications unless otherwise stated
SUB200 (SCS200.7sys)
1