jcb 19C-1E - Tie down Points

Please see operator manual for full details.
TIE DOWN POINTS
When transporting the machine one of the following two methods should be used:
Method 1
A – Front undercarriage track leg tie-
down points
C – Angle = 25° to 45°
E – Length = 1,723mm to 1,027mm
G – Length = 2,500mm
J – Tie down decal
B – Rear undercarriage track leg tie-down
points
D – Angle = 9° to 15°
F – Length = 1,726mm to 1,023mm
H – Slew ring centre line
19C-1E
Fig. 3
8